For Sale

12/23/2017 4:25PM EST

American Tanto

This American Tanto was ground from 1/8″ thick 80crv2. It has a 3/4 height hollow bevel on the primary section with a shallow convex secondary bevel and a convex zero bevel (no secondary edge) at the tip, on the 3 1/8″ long blade. There is a slight golden hue to the hammered finish flats, and a 800gr polished finish on the bevels. The handle on this knife is made from thick brass liners under high polished Black G10. The pins are “Atom” Mosaics, with a thick wall brass lanyard tube. The knife handle and tang are hand finished to 2500gr.

$295 – American Tanto Base
$45 – Thick Brass Liners
$25 – “Atom” Mosaic Pins
$365 – Total

S&H in the USA will be $16.50.

Please contact me at order@mpknives.com  to purchase this knife.

Leather work can be had from John at https://badgerclawleatherworks.com/

Thank you,
Matthew M Paul

 

 


American Tanto
SOLD – pending final payment

 

This American Tanto was ground from 1/8″ thick 80crv2. It has a 3/4 height hollow bevel on the primary section with a shallow convex secondary bevel and a convex zero bevel (no secondary edge) at the tip, on the 3 1/8″ long blade. There is a slight golden hue to the hammered finish flats, and a 800gr polished finish on the bevels. The handle on this knife is made from Olive Drab Canvas Micarta, with thin black G10 liners. The pins are Carbon Fiber, with a thin wall stainless steel lanyard tube.

SOLD, pending final payment – American Tanto

S&H in the USA will be $16.50.

Please contact me at order@mpknives.com  to purchase this knife.

Leather work can be had from John at https://badgerclawleatherworks.com/

Thank you,
Matthew M Paul

 


12/17/2017 4:50PM EST

Forged Drifter

 

This Drifter was forged to shape from 3/16″ thick 80crv2. It has a full height convex bevel on the 4 1/2″ long blade. There is a gun blue finish on the forged bevel section, and a 800gr polished finish on the edge bevel. The handle on this knife is made from Olive Drab Canvas Micatra laminated to Tan Linen Micarta. The pins are a really neat looking mosaic pin that is in the shape of an Atom, with a thin wall brass lanyard tube.

The pricing break down is as follows:
$295 base model Drifter
$20 liner material
$25 Mosaic Pins
$340 Total

Shipping in the USA should be about $16.50, but will be calculated on an individual basis.

Please contact me at order@mpknives.com  to purchase this knife.

Leather work can be had from John at https://badgerclawleatherworks.com/

Thank you,
Matthew M Paul

 

12/21/2017 2:42PM EST

American Puukko – SOLD

 

This American Puukko was ground from 1/8″ thick 80crv2. It has a hollow ground bevel on the 3 1/4″ long blade. There is a 800gr polished finish on the bevels. The handle on this knife is made from black g10. The pins are copper, with a thin wall copper lanyard tube.

SOLD – American Puukko

Shipping in the USA should be about $16.50, but will be calculated on an individual basis.

Please contact me at order@mpknives.com  to purchase this knife.

Leather work can be had from John at https://badgerclawleatherworks.com/

Thank you,
Matthew M Paul

 

——————————————————-

12/19/2017 10:06AM EST

American Tanto Prototype – SOLD

This American Tanto was ground from 1/8″ thick 80crv2. It has a 3/4 height convex bevel on the primary section with a shallow convex secondary bevel and a convex zero bevel (no secondary edge) at the tip, on the 3 1/8″ long blade. There is a gun blue finish on the hammered finish flats, and a 800gr polished finish on the bevels. The handle on this knife is made from Bocote wood. The pins are a hammered finish copper, with a thin wall copper lanyard tube.

SOLD American Tanto

Shipping in the USA should be about $16.50, but will be calculated on an individual basis.

Please contact me at order@mpknives.com  to purchase this knife.

Leather work can be had from John at https://badgerclawleatherworks.com/

Thank you,
Matthew M Paul